Blink tango! User Manual download pdf (Page 2)

Dear Customer,

You have just purchased a TANGO Uno coffee machine incorporating "UNIC"

know-how acquired from the experience of over 70 years in the coffee-machine

field.

With the TANGO Uno model, you have at your disposal a highly professional

automatic machine which presents 1 infusion unit in a reduced space.

To operate your machine in the best conditions, please read the following

instructions carefully.

The Manufacturer reserves the right to modify the appliances presented in this publication without notice

TECHNICAL CHARACTERISTICS

DIMENSIONS CAPACITIES ELECTRIC CHARACTERISTICS

Width:

Height:

Depth:

42.5 cm

76 cm

60 cm

boiler:

Waste drawer approx.

Hoppers :

6.5 liters

90 cups

1 x 1.5 kg

1 x 1 kg

200V mono

230V mono – 400V tri+N

240V mono – 415V tri+N

4.3KW –21.3A

5.6KW – 24.5A – 8.2A

6.1KW – 25.5A – 8A

WEIGHT

Net

75 kg Coffee spout height : 9 to18 cm PRODUCTION RATE: 200 cups/hour

DAILY CLEANINGS

ON A FULLY AUTOMATIC COFFEE MACHINE, IT IS VERY IMPORTANT TO CARRY

OUT, AT LEAST ONCE PER DAY, THE CLEANING SEQUENCES ABOVE-

DESCRIBED, IN ORDER TO ENSURE A CORRECT LEVEL OF HYGIENE, SERVICE

QUALITY, AND RELIABILITY OF YOUR COFFEE MACHINE.

A) QUICK CYCLE

(duration 15 seconds)

COFFEE

UNIT

) ⇒)

CAPPUCCINO

DEVICE*

) ⇒)

These cycles consist in making water pass through all the corresponding circuits They can

be repeated several times or stopped by pressing the key ( - ) or ( + ) again as desired.

* This cycle is imposed by the machine 15 minutes after the last use of the cappuccino

device.

B) LONG CYCLE COFFEE UNIT

(duration 8 minutes)

These cycles are possible only by the programming of the Day/Night automatic passage.

During this programming the user can activate the Automatic cleaning option. If the option

is activated, on each Day/Night or Night/Day passage, a long cleaning cycle will start

automatically. This cycle consists of making hot water pass, and also with some piston

movements and some sequences of openings and closings of the infusion and cleaning

electrovalves.

C) LONG CYCLE WITH CLEANING TABLET COFFEE UNIT

(duration 8 minutes)

MUST BE CARRIED OUT IMPERATIVELY EVERYDAY AFTER SERVICE

( Maximum time between 2 cycles : 26h00 )

- Remove the waste drawer

- Unscrew the plug of the cleaning block located under the drawer.

- Introduce a cleaning tablet and screw the plug back in without

blocking it.

- Put the drawer back and press ( + ) or ( - ) key according the case.

The display indicates how to proceed step by step. For safety

reasons, this cycle can not be stopped in order to ensure a perfect

rinsing of the cleaning product.

D) CAPPUCCINO DEVICE

A cleaning cycle of the "milk" circuit is done from a "foam" or "milk" key, replacing milk by

water, with possibly a cleaning product adapted to the cleaning of the dairy residues. In

this case, of course, several rinses with water must be carried out, after using the product.

E) DISASSEMBLING OF THE MILK AND COFFEE OUTLETS

It is advised to disassemble daily after service the milk and coffee

outlets for careful cleaning.

- Place the coffee spouts down and draw them forward.

- Clean the spouts under a tap or in a dish-washer.

- Disassemble the complete cappuccino device turning the whole

unit to the right and drawing it down.

- Disassemble each part for separate cleaning including the milk

sucking tube.

- Re-assemble the whole mechanism.

F) STEAM TUBE

After each use, clean the steam tube with a wet rag and push the steam push-button for

a short moment to eliminate the small amount of milk inside the tube. Disassemble the

end of the steam outlet to clean it more easily.

G) BODY

Use a soft cloth and alcohol for the stainless-steel parts and a non-abrasive detergent for

the painted parts.

The waste drawer is entirely stainless-steel and it can be cleaned with water without

problem. But be careful not to scratch the painted parts.

 PROGRAMMINGS

The access to programmings is possible only with a CUSTOMER magnetic card.

Introduce your card in the reader, press the MENU key and select the heading you

wish to modify by pressing ( + ) or ( - ) keys:

¾ Adjustment of the clock

¾ Programming of the different volumes or timings (PRO. NUMERIC)

¾ Programming of the waste drawer capacity (PRO. DRAWER CAPACITY)

¾ Programming of the automatic passage from Day to Night (PRO. DAY/NIGHT)

¾ Neutralizing of the safety sensors in the hoppers (PRO. COFFEE SAFETY)

CAUTION: You must avoid switching off the machine when a magnetic card is

in the reader. In some cases, this can modify some programmings (particularly

the grinders assignment to keys).

A) EXPLANATION OF EACH FUNCTION OF THE CUSTOMER MENU

1) Clock

Allows adjustment of the time, date and day of the week

2) "PN" Numeric Programming

Allows modification of

the parameters relative to the water volumes or to the steam

timings:

D : Water dose for the coffee cycles or hot water outlet

T : Timing of the steam outlet

Tm : Timing for the milk foam

Tl : Timing for the hot milk

The PN programming modifies simultaneously the 1-cup and 2-cup keys of a

same type of beverage of the same unit.

3) Programming of waste drawer capacity

Permits programming the number of cups of the waste drawer capacity according to

the coffee adjustments of the customer. A previous message indicates when 90% of

this quantity is reached. At 100% of this quantity, the "drawer overflow" safety

countdown blocks the machine. The average capacity is about 90 cups. The

maximum value that can be programmed is 999, in the case for example of a direct

chute through the counter (optional equipment). The value "00" cancels the "drawer

overflow" safety.

4) DAY/NIGHT programming

Permits programming the hours of automatic passage from Night to Day mode or

vice versa, followed or not by an automatic cleaning cycle. It is possible to neutralize

the days corresponding to weekly closing days. The days are represented by a figure

(1=monday ; 2=Tuesday ; … and 7=sunday). When a day is neutralized, the

corresponding figure is replaced by X. To activate or deactivate a day, you must

press the Night/Day key when this day is blinking.

Note:

When the automatic cleaning function is activated, the cleaning cycles occur even if

the Day/Night or Night/Day passage is operated manually pressing the Day/Night key.

5) Coffee safety programming

Permits the deactivation of safety sensors in the coffee hoppers in case of an

abnormal functioning of the photoelectric cells.

B) OTHER PROGRAMMINGS / SELF MODE

Only a qualified technician well acquainted with the coffee machine will be able to do

all the other programmings and controls in order to meet your requirements. In

particular, he will be able to configure your machine in SELF MODE neutralizing

some keys of the central keyboard in order to avoid inapropriate use by non-

authorized persons. In this case, the display indicates "UNIC TANGO/S".

unO

LA MACHINE DU BON CAFE

INSTRUCTIONS FOR USE

Z.I. 4° Rue - B.P.425 06515 CARROS CEDEX 1

FRANCE

Tél : (33) 04 92 08 62 60 Fax : (33) 04 93 29 24 23

http ://www.unic-sa.com e-mail : info@unic-sa.com

FR9122 - 03/2008

1 2

Comments to this Manuals

No comments

Blink tango! User Manual Page 2

Comments to this Manuals